TruXedo TruXport vs Edge

Both tonneau covers offer a soft roll-up operating style and low-profile design. They can be handily installed within minutes and there is no need for drilling. Moreover, both are fitted over the bed and lack rack compatibility.

TruXport is provided with a high-quality leather-grain vinyl composition. It has cross tubes which grant it a smooth and sleek look when closed. Its dual paddle latches add to its usage comfort. It lacks remote powering but you can have total bed access by rolling the cover towards the bed head and securing it with buckle straps.

Edge captions a low-profile design and is composed of first-rate leather-grain vinyl. Its cutting-edge outline promotes its design. Moreover, its adjustable tension control system gives it a stretched appearance. Its single trigger latch makes it quite easy to be operated. It is operated manually and gives you total bed access.

Compared to TruXport, Edge is a better option as it offers a tougher composition and provides better performance. However, its price is much higher compared to its peer.

Quick Comparison Table

SpecificationsTruXportEdge
ManufacturerTruXedoTruXedo
StyleRoll-upRoll-up
InstallationDrill-freeDrill-free
CompositionVinylVinyl
Lock TypeTailgateTailgate
Remote PoweringNoNo
FitmentOver the bedOver the bed
Bed Access100%100%
Warranty5-Year5-Year
Price310 – 350$430 – 450$

Installation Process

Both covers can be easily installed within 20 minutes without drilling. However, there is a slight difference in the installation of both.

TruXport can be installed as follows:

  1. Install the bulkhead seal over the bed cap.
  2. Attach end cap seals to the end of the rails.
  3. Place the rails over the sides of the bed and the cover over the bed cap.  
  4. Attach the cover to the side rails with the help of end caps.
  5. Fix with side rails by using clamps.
  6. Roll the cover towards the tailgate and at its latching end attach the foam seals so that it locks in position over the side rails.

Edge’s installation requires the following steps:

  1. Attach the bulkhead seal over the bed cap.
  2. Fix the side rails with the help of clamps.
  3. This cover has a header rail provided with two bolts which slide into the holes on the front ends of the side rails.
  4. Fix the header rail with the side rails by nut tightening the bolts passed through the holes on the side rails.
  5. Roll the cover towards the tailgate where it locks with side rails with a slight push.

TruXport is easier to install as compared to its opponent. Its installation does not require bolting as its side rails have end caps which serve as the attachment sites for the cover with the rails.

Design Comparison

TruXport captions a sophisticated low-profile outlook. Its top-mount design allows it to sit 1.5 inches above the truck bed, granting it an elegant look. Moreover, its flat cross tubes give it a sleek and smooth appearance. It is finished with a leather-grain vinyl coating which further promotes its design. It is available in three sizes and only one colour.

Edge also features a low-profile cutting-edge design with an aerodynamic arched back which intensifies its appearance. It also sits 1.5 inches above the bed.  Its stake pocket access adds to its outlook. Moreover, it is finished with a leather-grain fabric coating for further decency in its design. It is available in only one size and one colour. Its standard size weighs more than that of its opponent’s.

Physical PropertiesTruXportEdge
Available Sizes5’8”, 6’6”, 8’6’7”
Compared Size6’6”6’7”
Available ColoursBlackBlack
Dimensions (L x W80” x 6” x 6”80.5” x 9.5” x 5.2”
Weight (lbs)2732

However, its counterpart is available in more sizes but the design of Edge is more attractive and creative due to some additions like a stake pocket, a side rail handle and a  header rail.

Cover Composition

TruXport’s composition includes industrial grade leather-grain vinyl coating which allows it to cope with the harshest weather conditions. It can easily bear rain/snow load and up to -20°C of temperature. Moreover, its industrial strength Velcro keeps it tight and stretched, making it resistant to tear and wear in every condition. 

Edge is also composed of high-quality leather-grain vinyl which grants it a tough texture. Its durable aluminum frame promotes its resistance against UV radiations. Its secure rods prevent the cover from collapsing. Moreover, industrial strength Velcro is included in its composition as well which promotes its wear and tear resistance. It is also capable of bearing snow/rain load.

CompositionTruXportEdge
Material UsedVinylVinyl
FinishingLeather-grain vinylLeather-grain vinyl
Tear ResistanceVelcroVelcro

In comparison with its opponent, Edge has a stronger composition due to its aluminum frame which is UV resistant thus promoting its durability.

Performance

TruXport is a soft roll-up truck bed cover which is operated manually. Its pre-set tension control system keeps the cover stretched and makes it easy to be operated. A dual paddle latch system is installed in it which allows you to open or close the cover from either side of the tail rail. Moreover, it is provided with buckle straps which secure it at any position over the bed allowing partial bed access. You can also have full bed access by securing it above the bulkhead with straps.

Edge’s operating style is also roll-up but lacks remote powering. It is provided with an adjustable tension control system allowing you to adjust the tightness of your cover on your own. Its trigger latch is convenient in releasing the cover from the side rails just with a gentle pull. Moreover, its hook and loop fastening makes it quite easy to be opened and closed. Its secure rods prevent the cover from collapsing and buckle straps secure the cover at any point above the truck bed.

PerformanceTruXportEdge
Operating StyleRoll-upRoll-up
Remote poweringNoNo
Tension ControlNon-adjustableAdjustable
Latching systemDual paddle latchSingle trigger latch

Both products have a roll-up operating style and lack remote powering but Edge offers an adjustable tension control system. Moreover, its hook and loop fastening, secure rods and stake pocket access allow it to perform better as compared to its rival.

Security

When it’s about security the dependency of both tonneau covers is upon the tailgate lock. Both lack key lock systems and offer pull latches which are to be pulled to access the cover. You have to open the tailgate first to access both covers. Both covers can’t bear violent strokes and can be ruptured so they are not an effective option in the case of security.

Warranty

 Both tonneau covers are equally reliable and have the same warranty policy. Both offer a warranty period of 5 years which reflects their durability. Also, 30 days of a money-back guarantee is offered for both products.

Pricing

TruXport is much cheaper compared to its competitor. It lies within an affordable price range. Usually, its cost is intermediate between 310 to 350 dollars.

Whereas Edge’s stronger composition and better performance lead to its higher price. Its price ranges from 430 to 450 dollars.

Last Words

  •  TruXport is easier to install as there is no need for fastening nuts to attach the cover with the side rails.
  • Edge’s high-grade aluminum frame leads to its tougher composition.
  • Edge has a better design due to some of its additional features like stake pocket and header rail.
  • Edge performs better as it has secure rods, a stake pocket and a hook and loop fastening mechanism.
  • Both are equally good in their security which depends upon the tailgate lock.
  • Edge costs more than its rival.